Leave your email address and stay informed about this article.
Automatic ventilation release: Wind/rain detector
The wind and/or rain detector with integrated evaluation electronics and built-in time delay is designed for connection to SHEV and ventilation control panels from SIMON RWA Systeme GmbH.
They prevent windows controlled by the control panel from accidentally remaining open in the event of excessive wind and/or rain.
Functional description
The anemometer transmits the wind force measured by the wind wheel to the integrated evaluation electronics.
This measures the actual value, compares the set limit value and, if it is exceeded, switches a signal contact which activates the "CLOSE" command in the electrical control unit.
The rain detector is equipped with a heated meander.
When rain occurs, a signal contact is also passed on to the connected control unit, which activates a "CLOSE" command.
The complete evaluation electronics is integrated in the housing of the detector.
The limit value of the wind force is freely selectable between 1 - 12 Beaufort (factory set to 4 Bft.).
To bridge gusts of wind, a switch-on delay of up to 24 seconds can be set (factory set to 6 seconds).
The wind/rain detector provides a potential-free contact for on-site evaluation.
The detector can be mounted on a pole or directly on a wall.
Operating voltage range: 20 - 30 V DC / AC
Rated voltage: 24 V DC / AC
Current consumption in idle state: 70 mA
Current consumption when triggered: 110 mA
Protection class: IP 65
Operating temperature: - 20° to + 85° C
Load capacity of signal contact: 30 V / 1 A changeover contact
Mounting accessories: Mounting bracket, natural aluminum and galvanized mast clamp, inner Ø 52 mm for max. 2" tube
Weight: approx. 0.5 kg
Housing: ABS plastic, light gray similar to RAL 7035, 190 x 100 x 150 mm (L x W x H)
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Protection class : | IP 65 |
Voltage : | 24 V |
Scope of delivery: | Wind/rain detector, mounting bracket, mast clamp |
Dimensions: | BxHxT 500x500x210mm |
Scope of delivery
Wind/rain detector, mounting bracket, mast clamp