Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
Quantity | Unit price |
---|---|
to 3 | €477.36 * |
from 4 | €453.49 * |
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
The wind/rain detection unit, consisting of the WRM 401/C wind/rain detector and the WRF 401/C wind/rain sensor (which must be ordered separately), is used to automatically close electrically operated windows, awnings or ventilation units when it starts to rain or snow, or when there is wind. Wind/rain detection is performed by the wind sensor or rain sensor of the WRF 401/C, which must be connected externally. Alternatively, the ventilation of the WRM 401/C can be controlled by an externally connected thermostat or by ventilation pushbuttons which can also be connected externally, whereby the wind/rain detection always has the highest priority.
One LED each indicates the switching status for wind, rain and temperature. One potential-loaded and two potential-free changeover contacts (230 V AC) are available for controlling the motors.
WRF 401/C wind/rain sensor and wind evaluation
The wind sensor of the WRF 401/C consists of a wind wheel which, depending on the wind speed, generates a certain switching frequency which triggers a switching operation of the output relays. This switching operation is indicated by a "Wind" LED.
WRF 401/C wind/rain sensor and rain evaluation
If rainwater gets onto the sensor electrodes, a signal is forwarded to the WRM 401/C and a switching operation of the output relays is triggered. This switching operation is indicated by a "Rain" LED. After the electrodes have been dried by the built-in heater, the output relays switch back.
- Output relays: Group 1: potential contact 230 V AC/max. switching capacity 230 V AC/8 A, Groups 2 and 3: potential contact switching capacity 230 V AC/8 A
- Housing: color gray (similar to RAL 7035, light gray), with transparent door
- Power consumption: max. 8 W
- Option connection of:
- 1 thermostat type RTR 6124/24 V AC
- 3 pcs. e. g. double rocker switch LT1-UP/AP-DW with A/Z/Stop - ventilation function
- optical display: Operation/rain/temperature/wind, wind speed from 3 - 20 m/s by 8 LEDs
- Rain sensor
- Measuring principle: conductivity measurement electrode heating integrated in the sensor. Rain sensitivity adjustable in 3 steps: low, medium, high (by jumper). Rain start delay: practically 0 seconds. Rainfall delay: adjustable to 5 - 10 minutes.
- Protection class: IP 54
- Temperature range: temperature class 3 acc. to VdS 2581 (-5 °C to +40 °C), temperature class 3 acc. to VdS 2593 (-5 °C to +40 °C)
- Supply voltage: 230 V AC/50 Hz
not compatible with wind/rain sensor WRF 401/B
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Protection class : | IP 54 |
Voltage : | 230 V AC/50 Hz |
Measuring principle rain sensor : | Conductivity measurement Electrode heating integrated in the sensor. Rain sensitivity adjustable in 3 steps: low, medium, high (by jumper). Rain start delay: practically 0 seconds. Rainfall delay: adjustable to 5 - 10 minutes. |
Scope of delivery: | Wind-rain evaluation unit |
Scope of delivery
Wind-rain evaluation unit