![K+G Kettenantrieb KR10B](https://windowdrives.b-cdn.net/media/image/7b/cf/f9/k10_1_600x600.jpg)
K + G chain drive KR10B
Leave your email address and stay informed about this article.
Chain drive K10
24V DC drive
Rated current consumption 1.0A
Stroke 400/500 / 600mm
Push / pull force 300N / 150N (only 150N if the chain is extended further than 500mm on the drive with stroke 600mm)
Maximum locking force 1,600N
Full load speed 7.6mm / s, idle 11.4mm / s
Electronic limit switch off
Electronic emergency shutdown in case of overload
Heat - resistant silicone connecting cable 2,5m
Ambient temperature range -20 to + 60 ° C (according to DIN VDE 0282)
Degree of protection IP20 (according to DIN EN 60529)
Shapely, anodized aluminum housing
Matching consoles can be found under "Accessories".
Space requirements for mounting and dimensions, please refer to the data sheet!
Photos, videos and diagrams: Source © K + G Pneumatik GmbH
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Made in : | Germany |
RWA suitable : | Ja |
Holding force : | 1600N |
Limit switch Open - Close : | Electronic end position switch-off |
Connection line : | Heat resistant silicone - connection cable 2.5m |
Operating mode : | S2 - 2.5min |
Protection class : | IP 20 |
Design : | Chain drive |
Voltage : | 24 V DC |
Application : | Light domes, Pivot window, Tilt window, Top hung window |
Signaling contact : | No |
Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
Stroke length can be shortened : | No |
Ambient temperature : | -20 to +60°C (according to DIN VDE 0282) |
Color: | Silber eloxiert |
Stroke length: | 400mm |
Thrust: | 180N |
Scope of delivery: | Antrieb ohne Befestigungszubehör |
Tensile force: | 150N |
Scope of delivery
Antrieb ohne Befestigungszubehör