STG Beikirch chain drive CDs Easydrive/2
Ready to ship today, Delivery time appr. 1-3 workdays
Important info about the delivery time
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Chain drive CDs EasyDrive/2
Chain drive for opening and closing bottom-hung, top-hung and side-hung windows for surface mounting. Suitable for smoke ventilation and natural ventilation.
Features:
- Small dimensions, large forces
- Large opening angles can be realized
- Low overall height
- Stainless steel chain
- Simple installation thanks to click fastening - both on the frame and on the sash - with slim brackets and concealed fastening screws
- Connectors can be connected on both sides
- Intelligent EasyDrive electronics
- Allows synchronous operation of up to 4 drives and additional connection of up to two transom motors
Technical data:
- Rated voltage: 24 V DC ( -15 % / +25%)
- Rated current: approx.1 A at 300 N
- Cut-off: integrated, electronic load cut-off
- Compressive force: max. 300 N, compressive load capacity of the chain depends on the opening width
- Tensile force: max. 300 N
- Nominal locking force: max. 3000 N
- Lifting width: 200, 400 and 600 mm (opening width can be reduced)
- Running speed: approx. 4-10 mm/s
- Connection cable: plug connector, silicone cable, 2 x 0.75 + 4 x 0.25 mm² (not included in delivery)
- Duty cycle: ED 30 referred to 10 min, 3 min ON, 7 min OFF ; cycles 6
- Service life: > 10,000 ventilation cycles at nominal load
- Ambient temperature range: -10 °C to +60 °C
- Protection class: IP 20 according to DIN EN 60 529
- Housing: aluminum
- Color: silver
- Scope of delivery: Please order drive, brackets and connection cable separately
- Acoustic measurement: LpA < 70 dB(A)
- Minimum sash height at stroke width:
Mounting on bottom-hung window, sash mounting:
- FH min = 380 mm for CDs/200
- FH min = 380 mm for CDs/400
- FH min = 750 mm for CDs/600
- FH min = mm for CDs/800
Tilt window mounting, frame mounting:
- FH min = 380 mm for CDs/200
- FH min = 380 mm for CDs/400
- FH min = 750 mm for CDs/600
- FH min = mm for CDs/800
Mounting on hinged window, frame mounting:
- FB min = 582 mm for CDs/200
- FB min = 720 mm for CDs/400
- FB min = 920 mm for CDs/600
- FB min = 1120 mm for CDs/800
- Dimensions:
- CDs/200 = 510 x 26 x 38 mm,
- CDs/400 = 610 x 26 x 38 mm,
- CDs/600 = 710 x 26 x 38 mm,
- CDs/800 = 810 x 26 x 38 mm,
You discover on the construction site that the opening width of the ordered drives does not fit?
No problem!
With a simple wire bridge you can adjust the basic configuration of the drives on site.
With a wire jumper you can easily
- Change the opening width
- Add or remove synchronized drives and dead bolt motors
- Redefine the zero position (= closing position)
- Advanced functions can be set via the EasyDrive software, e.g.:
- Seal relief
- Opening width
- Intervention protection: closing speed < 5 mm/s
- Four speed ranges
- Four force ranges
- Signal contact: OPEN | CLOSE | Position
- Locking direction of dead bolt drive
- Online movement of drives OPEN | CLOSE | Position
Please ask for our technical advice Tel: 09280-98111915!
Photos, videos and diagrams: Source © STG Beikirch
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Stroke length can be shortened : | Ex works - on request |
Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
Application : | Rotating window, Tilt window, Top hung window |
Voltage : | 24 V DC |
RWA suitable : | Ja |
Design : | Chain drive |
Modell : | CDs EasyDrive/2 |
Color: | silver |
Voltage range: | 24 V DC(-15% / +25%) |
Stroke length: | 200mm |
Thrust: | 300N (depending on stroke) |
Scope of delivery: | Drive - not included in the scope of delivery: Cable sets, sash bracket ( depending on profile system), mounting brackets |
Dimensions: | see data sheet |
Housing: | Aluminium |
Speed: | 4-10 mm/s (adjustable on request) |
Current / Power: | approx.1 A at 300 N |
Tensile force: | 300N |
Scope of delivery
Drive - not included in the scope of delivery: Cable sets, sash bracket ( depending on profile system), mounting brackets