WindowMaster chain drive WMX 826-1
Delivery time 9 - 12 Working days
Important info about the delivery time specification
incl. VAT plus shipping costs
Leave your email address and stay informed about this article.
Programmable 24V DC chain drive for surface mounting for SHEVS and comfort ventilation.
Can be used for bottom-hung, top-hung, top-hung, side-hung, pivot, reversible and parallel opening windows.
Range of application
- is used together with ±24V control units or control units with MotorLink®
- can be used together with a WMB interlock drive
- external terminal block can be connected directly to the motor (version E)
- the drive is available in a version with or without UL certification:
- Europe: order without UL certification (version 0)
- USA / Canada: Order with UL certification (version U)
- synchronization up to 4 window operators - no external synchronization module necessary
- exact position feedback and 3 speeds possible when used with MotorLink® controls
- soft close
- a reprogramming of pressure force, speed, Reversing and noise level can be done at any time, even after installation by the WAT 100 programmer
- built-in electronic load cut-off/end cut-off
- motor electronics with microcontroller
- the drive reverses to the ideal position of the window to increase the lifetime of the window seal
- easy installation
Technical data
- Chain stroke 50 - 500mm, in steps of 10mm
- Opening speed 9mm/s (programmable 3 - 9,5mm/s)
- Compressive force depending on chain length - see data sheet
- Tractive force 200N
- Operating voltage nominal 24V DC
- 24V DC (max. 10% ripple)
- Current consumption 1A
- Size 487 x 30,5 x 42mm (WxHxD)
- Color aluminum (RAL 9006) or white (RAL 9010)
- To be ordered separately Fittings and cables (WLL cables)
Technical advice
+49 9282 48731-15
technik@bsc-technology.de
Fast delivery
... of goods in stock. Orders placed before 14:00 are usually shipped the same day.
Questions about the article
Stroke length can be shortened : | No |
Humidity : | NOT suitable for outdoor use! max. 80% relF, NICHT KONDENSIEREND |
Application : | Pivot window, Tilt window, Top hung window |
Voltage : | 24 V DC |
RWA suitable : | Ja |
Design : | Chain drive |
Modell : | WMX |
Color: | white |
Stroke length: | 500mm |
Thrust: | see data sheet |
Scope of delivery: | Chain drive (not UL certified) with 5m cable with Fast-in/ Fast-on connectors for WLL feed line. Please order brackets separately. |
Dimensions: | 487x30,5x42mm |
Speed: | 9mm/s |
Scope of delivery
Chain drive (not UL certified) with 5m cable with Fast-in/ Fast-on connectors for WLL feed line. Please order brackets separately.