Products from Kingspan STG GmbH

Swivel bracket SBFM 5/EV1 for FM actuators Range of application: Design similar to SBFM4, but the swivel movement is limited to 4°. This ensures the transmission of the max. pressure force of the actuator. Please order accessories for...

Swivel bracket SBFM 6/EV1 for FM drives Range of application: Design as SBFM5, but for bottom-hung, top-hung, side-hung and roof windows, outward opening. Please order accessories for tandem design in pairs. Note on installation: A...

Sash plate FM/309-401 for FM drives Sash plate for skylight installation, if there is no sufficient screw-on surface for the standard sash bracket on the frame of the window sash Sash plate without grub screw

Sash plate FM/501-800 for FM drives Sash plate for skylight installation, if there is no sufficient screw-on surface for the standard sash bracket on the frame of the window sash Sash plate without grub screw

Shim plate SBFM-U10/S in silver-grey for FM drives Shim plate with 10 mm For shimming the FM drives for windows with low rollover Please order accessories for tandem in pairs!

Shim plate SBFM-U10/W in white for FM drives Shim plate with 10 mm For shimming the FM drives for windows with low overlap Accessories for Tandem please order in pairs!

Pivot bracket SBFM 1/S silver gray For FM 309-401 For mounting on bottom-hung windows outward Mounting on the frame if the sash height is less than the specified minimum Accessories for tandem please order in pairs!

Swivel bracket SBFM 1/W in white For FM 309-401 For mounting on bottom-hung windows outwards Mounting on the frame if the sash height is smaller than the specified minimum dimension Please order accessories for tandem in pairs!

for all FM chain drives Potential-free relay contact for displaying the window status For FM tandem drives with bolt motors on request

for all FM chain drives Acoustic signal in CLOSE direction Consisting of piezo buzzer incl. printed circuit board Note: When installing an acoustic detector, all FM chain drives type 309-401 are designed in the housing of an FM/401...

Electro holding magnets EHM-9 To supplement actuators for sufficient contact pressure Electro-holding solenoids can be used as a supplement to actuators for tilt or turn sashes in order to achieve a sufficient tight fit, especially for...

Flush-mounted installation set RBH/3A for RBH control panel in aluminum housing For SHEV control panel RBH/3A/ALU Dimensions flush-mounted box (H x W x D): 175 x 133 x 34 mm Dimensions frame (H x W x D): 204 x 204 x 2 mm For space...