Product finder
Step by step to the right product

>> To our product consultants

Printable checklists
Send in and receive offer

>> To the checklists

Products from D+H Mechatronic AG

D+H Mechatronic AG

D+H Mechatronic AG, headquartered in Ammersbek near Hamburg, has been driving the SHEV (smoke and heat exhaust ventilation) and ventilation industry forward for more than 50 years with high-precision window drives and control technologies as an innovative, market-determining, family-run company. Approximately 250 employees at the headquarters and a total of 550 colleagues worldwide are working to deliver optimal indoor climate and comfort, as well as sufficient air to breathe in case of fire.

From international airports to large shopping centres, architecturally complex museums to sophisticated office buildings and sports stadiums, D+H brings intelligent and certified system solutions for state-of-the-art building automation to any façade or roof. As architects, planners, metalworkers, façade builders and system vendors know, seeing D+H on a product is a plus for "Made in Germany" quality, service, knowledge and experience.

The D+H Group now consists of eight subsidiaries, their branches and a unique service and sales network in over 40 countries. We call this BUILDING ATMOSPHERE.

www.dh-partner.com

Filter
13 from 29
Close filter
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filtering!
Modul-Set PSM-MS-TCSU-CC für CPS-M
D+H Module set PSM-MS-TCSU-CC
Module set PSM-MS-TCSU-CC for CPS-M The supply extension set PSM-MS-TCSU-CC ensures the proper power supply of the CPS-M system up to 40 A. In the event of a power failure, it switches from the power supply unit to the battery. The set...
€353.43 *
Modul-Set CM-PSM-MS-BTM-TCSU-CC für CPS-M
D+H Module Set CM-PSM-MS-BTM-TCSU-CC
Module set CM-PSM-MS-BTM-TCSU-CC for CPS-M The basic / expansion set contains a supply and control unit as well as its required modules for setting up a CPS-M control center. Features: Consisting of the CPS-M modules: - Control module -...
€714.00 *
Connection-Modul ACN-CM501
D+H Connection-Modul ACN-CM501
Connection module ACN-CM501 The connection module is a direct access for all AdComNet-ready controllers to our own bus communication network AdComNet. For the realization of large projects, this turns a single system into a powerful...
€349.86 *
I/O-Modul ACN-IO501
D+H I/O module ACN-IO501
I/O module ACN-IO501 The I/O module enables communication between AdComNet bus and commercially available peripherals via digital inputs and dry contacts. Features: 8 freely configurable inputs (alarm, fault, LT) 8 freely configurable...
€1,085.28 *
Modbus-Gateway ACN-GW501-MRTU-0200
D+H Modbus-Gateway ACN-GW501-MRTU-0200
Modbus-Gateway ACN-GW501-MRTU-0200 The Modbus gateway enables communication between AdComNet bus and Modbus-based solutions. Features: Universal gateway for connecting AdComNet to a Modbus network 200 freely configurable Modbus inputs...
€866.32 *
Wetterzentrale WRZ
D+H Weather Center WRZ
Weather control center WRZ In combination with other D+H modules, the WRZ wind and rain control center controls up to 20 ventilation groups and takes into account weather data, temperature and manual control. Performance features:...
€349.86 *
Alarmabschaltmodul AM 44-Z für RZN-Zentrale
D+H Alarm shutdown module AM 44-Z
Alarm switch-off module AM 44-Z for RZN control panel The AM 44-Z is an add-on module for SHEV systems for integrating alarm switching modules such as signaling devices, fire bells and flashing lights. Performance features: Supply of...
€95.20 *
Antriebs‑Verzögerungsmodul AT 41 für RZN-Zentrale
D+H Drive delay module AT 41
Drive delay module AT 41 for RZN control panel The AT 41 is an add-on module for RZN and GVL central control units for time-delayed control of the drive in combination with shading units such as blinds. Performance features: Delays the...
€138.04 *
AUF/ZU-Meldemodul ERM 44 für RZN-Zentrale
D+H AUF/ZU-Meldemodel ERM 44
OPEN/CLOSED signal module ERM 44 for RZN control center The relay module ERM 44 is used to provide OPEN and CLOSED messages from BRV, TMS or BSY+ actuators as a potential-free contact. Performance features: For potential-free OPEN or...
€133.28 *
Antriebs-Folgeschaltmodul FS 41 für RZN-Zentrale
D+H Drive sequence control module FS 41
FS 41 drive sequence control module for RZN control center The FS 41 sequence control module is designed for the timed control of motorized, overlapping window sashes. Performance features: For the sequential opening and closing of...
€123.76 *
Gruppen-Sternverteiler GSV 45 für RZN-Zentrale
D+H Group Star Distributor GSV 45
Group star distributor GSV 45 for RZN control center The group star distributor GSV 45 is used as a Y-connector of the drive technology. Performance features: For splitting the drive connection wires of a group into 2 strands of 3 wires...
€99.96 *
Schließkanten‑Sicherungsmodul SSM 45 für RZN-Zentrale
D+H closing edge safety module SSM 45
Closing edge safety module SSM 45 for RZN Protection against jamming: The SSM 45 closing edge safety module is intended for protecting main and secondary closing edges on windows in conjunction with appropriate sensors. Performance...
€133.28 *
13 from 29
Last viewed